86 / GR86 / BRZ high tensile offset steering rack extenders Wheel Nuts

86 / GR86 / BRZ high tensile offset steering rack extenders Wheel NutsThe GKTECH high tensile offset rack extenders offer 2 primary benefits; offset rack spacer moving the rack forward to eliminate steering bind on high lock setups and they offer more steering rack travel which in turn gives more steering lock. Offset rack spacers are a great alternative to moving the steering rack forward. Relocating the steering rack is expensive and in some cases just not possible. In addition to relocating the pickup point this rack

NOTE: If you are using our older style V1/V2 86 steering kits with these lower control arms that use the straight style tie rod end you will need to replace that with our curved style tie rod end

- V5 arms now feature on-car adjustment to make alignments a breeze

A key feature for us was to have as much misalignment as possible as we knew that other designs had issues with running out of misalignment prematurely

The roll centre correction kit bolts up to the bottom of your standard knuckle and can be removed with no ramifications at all

0 degrees of camber and as high as +1

sheet metal construction that enhances both strength and agility

Bump steer correction is altered through the use of 0

which not only removes the ABS but allows the OEM brake system to accept the in-line master cylinder without any issues

- Now available in leather or suede

Perfect alternative to Nissan/Nismo replacement 11220-01U00

The Z32 factory upper arm is a horrible design and by design the misalignment in the upper arm runs through the large rubber bush

- Laser cut using multiple 2