Solid Carbide 4 Cutting Edges Insert Knife 12 x 12 x 1.5mm x 45 Degree Angle tc-CNC Bit Exceptionally Easy Smooth Glide under

Exceptionally Easy Smooth Glide under HIGH or LOW Tension

You build the support wings out of plywood (or another sheet material)

1-Phase Arbor Size: 5/8" Arbor Speed: 4500 RPM Blade Size: 10" Blade Tilt Direction: Left Maximum Blade Tilt: 45 Degrees Maximum Depth of Cut At 90 Degrees: 3-1/8" Maximum Depth of Cut At 45 Degrees: 2-1/8" Maximum Rip Right of Blade w/Included Fence & Rails 37" Floor to Table Height: 35" Table Size with Extension Wings Width: 44" Table Size with Extension Wings Depth: 27" Distance Front of Table to Center of Blade: 13-3/8" Distance Front of Table to Blade At Maximum Cut: 8-21/32" Dust Port: 4" Overall Width (side-to-side): 66-13/16" Overall Depth (front-to-back): 39-3/8" Shipping Weight: 368 lbs

simply swing it up or slide your board into the front of the curved foot

Hog out material in a fraction of the time that a straight bit would require

Solid Carbide 4 Cutting Edges Insert Knife 12 x 12 x 1.5mm x 45 Degree Angle tc-CNC Bit Exceptionally Easy Smooth Glide underMaterial: Chipboard, Balsa Core, Hardwood Softwood, Plastic Overview Replacement carbide knife for RC 2255, RC 2259, RC 2261, and RC 2263 cutters Recommended for: Chipboard, Balsa Core, Hardwood Softwood, Plastic