Toyota JZX100 Rear Knuckle Traction Arm Spherical Bearing #HYDR-HBRK NOTE: Shims wills space your

NOTE: Shims wills space your subframe down 6mm

washers etc are supplied

Note: Some sedans

if you have our hidden handbrake or budget hydraulic handbrake with the lever mounted horizontally then you would select the behind shifter variant

To top it off we're exclusively using high-quality Teflon lined bearings (over $140 in bearings cost for the pair on their own) Our rear lower control arms allow for + or - 15mm's of track width and are the only LCA's that we know of that allow adjustment perpendicular to the centreline of the car which means that as you change the width your wheel doesn't push further back or forward into the wheel arch (unintentionally altering your suspension curves)

Toyota JZX100 Rear Knuckle Traction Arm Spherical Bearing #HYDR-HBRK NOTE: Shims wills space yourWant to reduce bush deflection and change out your tired OEM traction arm bush? We have the solution! The Toyota JZX100 Rear Knuckle Traction Arm Spherical Bearings are a spherical bushing rather then a polyurethane or rubber bushing to significantly reduce bush deflection and ensure a much smoother operation throughout the range of suspension travel. As with all of the bearings that we use throughout our suspension arms, these spherical inserts use