1.75" Alum CP Section "J" CANW The bag is sewn with

The bag is sewn with a cord around the top to allow the bag to be tied closed once the contents have been loaded

This fitting is used along the eave of the tent as an intermediate fitting between eave pipes

Each length of tubing is drilled with parallel 5/16" diameter through holes located 3" from each end of the extrusion

Maximum Lifting Capacity: 100lbs (45Kg) This item has a shipping weight of 72lbs

Drying time is moderate (10-20min) with full cure time in about 24 hours

1.75" Alum CP Section "J" CANW The bag is sewn withThis 1. 75" OD aluminum lighter weight pole section is a component used to make longer sectional poles. The "J" section is used as a bottom section of a center pole and has a swaged top with push button to connect to the upper pole section or mid section pole and a bottom that is fitted with a black, low density polyethylene end plug. This pole section ships in a box with length of 48" . Specifications: Base Material: 1. 750" OD 6061 T6 Structural