4.0" 2pc Alum PP CPx18'0" Traditional Frame

4.0" 2pc Alum PP CPx18'0" Traditional FrameThis 2pc 4" OD aluminum lighter weight pole is split for ease of transport. The sections include a 9' Bottom section and a 9' top section. The 9' bottom section features a zinc plated steel end plug, 1 1 4" diameter hole for lifting, and a swaged top to fit into the bottom of the upper pole section. The top section of the pole is fitted with a zinc plated steel top pin. The top pin is a welded steel assembly with a 0. 847"OD pole pin measuring 12" in

660" OD and 1

This kedered aluminum tubing is used as a rafter in the Jumbotrac 30' wide frame tent system on the hip end only

Seasonal installations should replace tie-down straps annually or sooner if any damage is noted

This rope is commonly used for tie-down applications for lighter duty applications

This panel is not used in the Jumbotrac system

This cable is also used on the upper section roof cable for the 50' wide x 10' length gable Jumbotrac bay

Stake bars are utilized to increase holding power where a single stake is insufficient

The four patch assembly can be glued with HH-66 cement or welded with either a RF bar welder or handheld hot air welder

(2) Door Connection Brackets

This is the corner fitting for the Jumbotrac gable ended frame tent design

This item includes one 30x20 expansion middle used to extend a Gable or Hip Style Tent Top

and is highly resistant to temperature and weather extremes