System 30 - Main Ball Bearing Car, Ball Bearing Sheaves, 6:1 Purchase, German Sheeting, Control Arms with Cam Cleat 38 ø9.5 mm Clevis Pin Tie the jockey pole to

Tie the jockey pole to the cap shroup when used

This cleat can be installed on flat or curved surfaces using rivets

This is the ideal block for guiding sheets to a winch

319-583-01 shall be used for rigging screws produced prior to 2022

BRL: 8000 kg

System 30 - Main Ball Bearing Car, Ball Bearing Sheaves, 6:1 Purchase, German Sheeting, Control Arms with Cam Cleat 38 ø9.5 mm Clevis Pin Tie the jockey pole toSystem 30 Performance Ball Bearing Car for German sheeting and Cam Cleat control. Main sheet car in anodized aluminium and a 6: 1 control line system. The sheave house is articulating and stabilized by two stainless springs and the sheet sheave is a V shaped 60 mm machined aluminium wheel on Torlon ball bearings The arms are stainless and carries 38 mm composite Cam Cleats and three control sheaves each side. The sheaves for the control line are 40 mm