Precursor Powder of NCMOH2 (Ni:Co:Mn = 9:0.5:0.5) for High Capacity NCM Cathode Powder, 200g/bottle - Lib-PNCM911 Li3PO4 75Amps Syringe

75Amps Syringe

Apply firm pressure to the tape with a rubber roll or a spatula

The Alumina cutting blade fits with MTI SYJ-150 low speed saw or other brand of low speed saw

1mm thickness x 125 mm width x 200 mm Length

Polishing:                         both sides polished

Precursor Powder of NCMOH2 (Ni:Co:Mn = 9:0.5:0.5) for High Capacity NCM Cathode Powder, 200g/bottle - Lib-PNCM911 Li3PO4 75Amps SyringeLib PNCM911 is the precursor powder of NCMOH with Ni: Co: Mn = 9 : 0. 5: 0. 5 for High Capacity NCM Cathode Powder. There are 200 grams in one bottle Note: You must mix the precursor with LiOH. H2O and calcine the mixed powder at 750 790 C before use Specification Package 200g bottle in a vacuumed bag Composition NCMOH (Ni: Co: Mn = 9 : 0. 5: 0. 5) Configuration Sphere Particle Size Distribution D1011. 32 ? m D5013. 51 ? m D9016. 12 ? m Tap Density 2.