LiNbO3 saw grade wafer, 128 deg. Y-X cut, 4" dia x0.5 mm, 2sp bi Syringe needle holder to mount

Syringe needle holder to mount up to 7 needles (7 slots of 12 mm Dia

MSK-180SP is a gas-driven die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ) Its compact design enables the operation inside a glove box with Ar atmosphere where moisture/oxygen-sensitive electrodes will be cut (such as lithium metal electrode for Lithium-Sulfur

Please click the Pic1 & 2 for details

superconductor and magnetic epi film due to less mis-matched lattice and stable chemical and physical properties

Heating area     51 mm diameter with +/- 5ºC

LiNbO3 saw grade wafer, 128 deg. Y-X cut, 4" dia x0.5 mm, 2sp bi Syringe needle holder to mountSaw grade single crystal LiNbO3 Purity: > 99. 9% Orientation: 128 degree rotated from the +y through the +Z axis about the X axis Size: 4" diameter x 0. 5mm Flats: Primary Flat is normal to the +X axis Polish: Two sides polished For indication of the directions, please click here. Typical Properties Crystal Structure Hexagonal a=5. 148 , c= 13. 863 Growth Method CZ Melting Point 1250 oC Density 4. 64 g cm3 Curie Temperature ~ 1160 oC Hardness 5 Mohs