180 Degree Square Tube Die for 105 Brute Tube and Pipe Bender (19 mm OD, 88.9 mm CLR) 200 "Bottle-Jack" Centerline Radius: 4-1/2" (114

Centerline Radius: 4-1/2" (114

Notch Angle: 0degrees-60degrees

This roll set will bend the flat stock up to 1-1/4" in width

Our Manual 3-roll Bender comes with a 1-year warranty against manufacturing defects

At anytime during the design in PRO's assembly interface you can lookup the details of a part and print out entire manufacturing instructions

180 Degree Square Tube Die for 105 Brute Tube and Pipe Bender (19 mm OD, 88.9 mm CLR) 200 "Bottle-Jack" Centerline Radius: 4-1/2" (114Specs Outside Diameter of the Tubing (OD): 20. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 3 1 2" (88. 9 mm) Maximum Degree of Bend: 180, after springback Includes Steel Main Die Steel Backing Block with Anti Springback Tab Steel U Strap Resources Tube and Pipe Bending