Go/No Go Gauge Orifice ID 0.0411"/0.0415" Manufacture Certificate All Melt Flow Indexers

Go/No Go Gauge Orifice ID 0.0411"/0.0415" Manufacture Certificate All Melt Flow IndexersThis gauge is used to ensure the inner diameter of the half die orifice falls within 0. 0413 + 0. 0002" as required by ASTM D1238 and ISO 1133. This gauge is certified by the manufacturer. Standards: ASTM D1238, ISO 1133 P N: 02001134

P/N: 12002022

and Volume Rate

Use the ISO 179 Charpy setting gage to space the ISO 179 Charpy anvil and center in reference to the ISO 179 Charpy striker

P/N: 12002031

6 J (200 in

P/N: 02002105

Dead weight piston plastometer for procedure A – manual operation: calculating flow rate (melt index) for each cut off

Standard 'half die' made from carbide

*Please contact the factory if required to be used with the MP1200 Selectable Weight model*

Programmable piston displacement transducer required for conducting Automatically Timed Flow Rate Measurements and volume measurements (MVR)

Piston foot to be purchased separately

Use this brass cleaning brush to clear residual material out of the standard die