Dead-end bracket for Code Zero halyard, Max rope ø14 S66 bearing surfaces etc

bearing surfaces etc

With such a combination on board

the safe working load and the breaking load for the top set of sheaves are reduced by 50%

The BBB60 Triple Becket Cam Block combines three 60 mm sheaves

The Genoa End Control with Single sheave is part of the System 42 deck hardware range

Dead-end bracket for Code Zero halyard, Max rope ø14 S66 bearing surfaces etcDead end fitting for a Code Zero halyard. Code Zero halyard with 2: 1 purchase To boost the performance when using a Code Zero, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2: 1 purchase needs to be arranged by fixing the dead end of the halyard in the mast and letting it run through a block attached to the halyard swivel. Position on the mast must be specified by Seldn. In most cases Code Zero