Li-Ion Battery Cathode - Aluminum Foil Single Side Coated by Li-NCM (8:1:1 ) (241mm L x 200mm W x 0.06mm T) 5 sheets/bag - bc-af-241NCM-SS811 Crystal Substrate A-Z

Li-Ion Battery Cathode - Aluminum Foil Single Side Coated by Li-NCM (8:1:1 ) (241mm L x 200mm W x 0.06mm T) 5 sheets/bag - bc-af-241NCM-SS811 Crystal Substrate A-ZThis electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide (NCM811) on a single side and can be used as the cathode of Li Ion battery 5 sheets bag SPECIFICATIONS Material: LiNiCoMnO2 8: 1: 1) Current collector (substrate): Aluminum foil (16 microns, area desnityof 4. 22mg cm2) Coated Area: 241mm L x 175mm W. The edge width of blank area is 12. 5 mm for each side. Single sides area density: 10. 5 0. 20 mg cm2

Specific Surface Area: 1

Laptop Computer

Dimension: 10 mm x 10 mm x 0

110    (70 +/- 2

Surface roughness: Ra < 5 A ( by AFM)

77% ) for l = 515 nm

Note: if you use the electrode sheet for single layer button cell

Crystal:          Ce: YAG  ( 0

(Nitrogen atmosphere is safe

Surface roughness: Ra < 5 A

1/4" in diameter vacuum sealing assembly will connect with 1/4" rubber hose

Assume Gauge Displayed Pressure Value is 100