Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources Ingestion-build-137917 It applies to scanners for

It applies to scanners for reflective and to scanners for transmissive media

and trailers

but is not limited to

BS ISO 13849-2:2012 specifies the procedures and conditions to be followed for the validation of specified safety functions through analysis and testing in accordance with ISO 13849-1

• Footholds impact test

Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources Ingestion-build-137917 It applies to scanners for1 Scope This European Standard describes the method for conducting acoustic emission testing (AT) of metallic pressure equipment during acceptance pressure testing using a planar location method. This standard is applicable also for subsequent tests for requalification. General principles of Acoustic Emissions are described in EN 13554. The objectives of the AE testing are to provide 100 % volumetric testing to define regions of the structure which