Mortar Sand for Anhydrite Screeds Subject to availability nor too soft so that

nor too soft so that the ball plugs to an excessive depth

Our concrete sands comply with the gradings set out in BS 882

its properties depend on the base it is laid upon - it will not perform as intended if not used as part of an engineered design

Coarse Top Dressing Sand should ideally be applied in two increments of about 4kg/m2 each (25 tonnes per 6000m2 pitch) allowing adequate time for sward recovery after each application

with half the ball's diameter buried beneath the surface

Mortar Sand for Anhydrite Screeds Subject to availability nor too soft so thatSpeciality Sand for the manufacture of self levelling floor screeds.