BoltHold SP12-38 Asphalt Anchor, 6-PACK Hardware material:Stainless steel The hole still needs to

The hole still needs to be carefully cleaned from dust using compressed air

Double-wall insulation maintains hot drinks hot and cold drinks cold for hours

EPX2 Adhesive is offered in three sizes

you will need to replace the mixing nozzle as the epoxy is likely to have started to harden in the nozzle

4" diameter header at the top of the anchor prevents the anchor from dropping below the surface

BoltHold SP12-38 Asphalt Anchor, 6-PACK Hardware material:Stainless steel The hole still needs toBoltHold SP12 is a medium duty asphalt anchor rated at 2,000 lbs. pull. The anchor is designed for mounting plates, fences, machinery and the like directly to asphalt surfaces. The 12" long SP12 38 incorporates a 3 8" 16 UNC female internal thread. The length of the bolt inside the anchor should not exceed 5". The anchor requires a 7 8" hole 12" deep and the use of a grout such as our EPX2 or EPX3. A 1. 4" diameter header at the top of the anchor