D3D ABS Carbon Fiber - 1.75mm 1KG Duplicator 9

D3D ABS Carbon Fiber - 1.75mm 1KG Duplicator 9ABS (Acrylonitrile Butadiene Styrene) is the grandfather of home 3D printing filaments. For best results, ABS requires a heated bed and preferably an enclosed printing environment. ABS has a higher resistance to heat and starts to soften at around 105 C. For this reason, 3D printed objects used in outdoor or higher heat applications tend to stand up better when printed from ABS Filament. One of the downsides to printing with ABS is the strong smell

12V or 24V 30W heater cartridge

Cost-effective

Extreme castability

• Copperhead™ Drawings

CarbonX™ CFR Carbon Fiber Reinforced Co-Polyester Filament

With E3D V6 and Titan

or ABS/Acetone Slurry on clean glass works great for us

Dimension:

Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA

Continuous use temperature (UL 746B)

Endures printing temperatures up to 290°C

This unit is assembled