ICM-20948 IMU module, soldered pins AIS Receiver but you have to enable

but you have to enable all interfaces and configure the system manually

Supports all AIS frequencies (161

38400 baud serial output in industry standard NMEA format (AIVDM)

2 watts min to 100 watts max

Cold Start acquisition < 30s

ICM-20948 IMU module, soldered pins AIS Receiver but you have to enableNote: Due to quality issues with our supplier, we currently do not stock the IMU module. We recommend to get an ICM 20948 module from Adafruit, Sparkfun (US) or Pimoroni (UK), which can be connected to the MacArthur HAT through the QWIIC connector. This is the Inertial Measurement Unit (IMU) recommended for OpenPlotter. Adding an IMU to OpenPlotter you can get heading, heel and trim data. It is a perfect complement to the MacArthur HAT. Shipped with