Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method PAS 15 Resistance to stress-corrosion cracking for

Resistance to stress-corrosion cracking for alloy EN AW-7075 in tempers

safe and standardized starter batteries

Clarification of the requirements for static head in the evaluation of test pressure

BS EN 980:2008 also provides examples of how symbols can be used and the information they convey

Developing strategies to minimize obsolescence during the design

Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method PAS 15 Resistance to stress-corrosion cracking for1 Scope This International Standard specifies methods for the determination of orthophosphate (see Clause 4); orthophosphate after solvent extraction (see Clause 5); hydrolysable phosphate plus orthophosphate (see Clause 6); total phosphorus after decomposition (see Clauses 7 and 8). The methods are applicable to all kinds of water including seawater and effluents. Phosphorus concentrations within the range of 0,005 mg l to 0,8 mg l may be determined