90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (38.0 mm OD, 152.4 mm CLR) Manual 3-Roll (Large Radius) Bender Includes: 1/2" Dimple Die |

Includes: 1/2" Dimple Die | Requires 1/2" Pilot Hole

Minimum Inside Radius: Approximately 70” (1778 mm)

each die undergoes a thorough heat treating process to ensure optimal hardness level

Nominal Pipe Size (Diameter Nominal): NPS 1-1/4 (DN 30)

Bend up to 2-1/2"

90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (38.0 mm OD, 152.4 mm CLR) Manual 3-Roll (Large Radius) Bender Includes: 1/2" Dimple Die |Specs Outside Diameter of the Tubing (OD): 38. 0 mm Minimum Wall Thickness (DOM): 0. 065 (1. 7 mm) Minimum Wall Thickness (4130): 0. 065 (1. 7 mm) Minimum Wall Thickness (ERW): 0. 083 (2. 1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 6 (152. 4 mm) Maximum Degree of Bend: