1-1/4" PVC Push Cap Compression Points NOTE: An Idea is to

NOTE: An Idea is to use an old

2” diameter holes

splits roots and other debris as it makes its way under the pavement and opens a hole larger than the shafts

As it advances It will chase the hole and push back out of the way any roots

This particular point is the Largest point that we sell

1-1/4" PVC Push Cap Compression Points NOTE: An Idea is toThe push cap is attached directly to the PVC pipe that is ready to be installed after all of the Bullet Mole shafts are removed. The push point is connected to the front or leading end of the pipe and the push cap is inserted into the bell housing on the opposite end of the same pipe, or If there is no bell housing then a coupling must be glued onto the pipe and the part inserted into the coupling. Once in place, the push cap may be struck with a