3/4"-1" PVC Push Point This tool pack comes with

This tool pack comes with everything you will need to go under any 16 foot piece of pavement and install up to a 1 inch diameter pipe or conduit

2) The Tapered Pull Connector is connected to the intended pipe or conduit above ground

it is simple removed from the PVC pipe by unscrewing it

to jack the extraction chain and shafts out

(1) Master shaft - 60" long

3/4"-1" PVC Push Point This tool pack comes withThis part is used to insert a 3 4' & 1" Sch 40 PVC pipe into the ground after the initial hole is opened with the compression point. It is threaded into the end of a 2 sch 40 PVC pipe or conduit. As it is screwed into the pipe it cuts its own threads on the inside of the pipe much like a tap. The outside diameter of the push point will be the same as the outside diameter of the pipe itself. Next this pipe point assembly is shoved into the same opening