G-Flex 655 Thickened Epoxy Adh. 946Ml General Hardware It is recommended that the

It is recommended that the coolant is replaced when the recommended mileages have been reached or after 5 years which ever is the sooner

hydrogen peroxide (30%) and formaldehyde (37%) Powder-free to reduce the risk of associated allergies and contamination of products being handled

Low backlash

Working with Polynt Polycor Topcoat Polycor topcoat should be conditioned to a temperature of 15-25 °C before use

Ideal flow behavior for application

G-Flex 655 Thickened Epoxy Adh. 946Ml General Hardware It is recommended that theDescription : G Flex Epoxy is a toughened, resilient two part epoxy engineered for a superior grip to metals, plastics, glass, masonary, fibreglass, and wet and difficult to bond woods. Make structural bonds that absorb the stresses of expansion, contraction, shock and vibration. Easy to use 1: 1 mix ratio provides a 45 minute pot life and a longworking time of 785 minutes at room temperature. Reaches an initial cure in 3 4 hours and a workable cure