Electrolyte-Gated Transistor Bottom Mount Cell - 15 mL, 0.2 cm2 Select electrolyte type::organic electrolyte Lithium Chip may be oxidized

Lithium Chip may be oxidized during handling and storage

m) is included for immediate use

Mini suction cups are available for the small wafer with less than 1" Dia

25°C): 100~350 mPa

Air dry at room temperature for 2 hours then final cure at 200 for 2 hours before placing in operation

Electrolyte-Gated Transistor Bottom Mount Cell - 15 mL, 0.2 cm2 Select electrolyte type::organic electrolyte Lithium Chip may be oxidizedThis is a stationary solution electrochemical cell designed to measure characteristics of electrolyte gated (or solution gated) transistors using liquid or gel electrolyte. Measured transistor sample can be fabricated on a rigid or flexible flat substrate (not included in the setup) with conducting thin film source and drain, and a layer of conducting or semiconducting channel material. The sample is loaded from the bottom via magnetic or screw mount,