Threebond Low Strength Thread Locker 0.34 oz. #1342AT002- Motorex 14” wheels cannot exceed 4-1/2”

14” wheels cannot exceed 4-1/2” backspacing

Snaps onto Ripper Cap

both housings use: Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets Rubber O-rings that completely seal the housings A sealed input gear and double-lipped output seal 100% sealing coverage throughout so you can forget about oil leaks Bearings That Rock Even the smallest parts on GDP portals are made with performance in mind

FITMENT Kit 1 Will Fit: Can-Am Defender HD 5 : 2017+ Can-Am Defender HD 5 DPS : 2017+ Can-Am Defender HD 8 : 2016+ Can-Am Defender HD 8 DPS : 2016+ Can-Am Defender HD 8 XT : 2016+ Can-Am Defender HD 8 XT Cab : 2016-2017 Can-Am Defender HD 8 XTP : 2018+ Can-Am Defender HD 10 : 2016-2019 Can-Am Defender HD 10 DPS : 2016-2019 Can-Am Defender HD 10 XT : 2016+-2019 Can-Am Defender HD 10 XT Cab : 2016-2017 Can-Am Defender HD 10 XTP : 2018+ Can-Am Defender HD 10 Mossy Oak : 2018+ Kit 2 Will Fit: Can-Am Defender MAX HD 8 : 2017+ Can-Am Defender MAX HD 8 DPS : 2017+ Can-Am Defender MAX HD 8 XT : 2017+ Can-Am Defender MAX HD 8 XT Cab : 2017 Can-Am Defender MAX HD 10 : 2017-2019 Can-Am Defender MAX HD 10 DPS : 2017-2019 Can-Am Defender MAX HD 10 XT : 2017-2019 Can-Am Defender MAX HD 10 XT Cab : 2017 Kit 3 Will Fit: Can-Am Defender HD 8 XT Cab : 2018+ Can-Am Defender HD 10 XMR : 2018+ Can-Am Defender HD 10 XT Cab : 2018+ Can-Am Defender Limited : 2020+ Kit 4 Will Fit: Can-Am Defender MAX HD 8 XT Cab : 2018+ Can-Am Defender MAX HD 10 XT Cab : 2018+ Can-Am Defender MAX Lone Star Edition : 2018+ Can-Am Defender MAX XMR : 2019+ Can-Am Defender MAX Limited : 2020+ Overall Fitment Can-Am Defender HD 5 : 2017+ Can-Am Defender HD 5 DPS : 2017+ Can-Am Defender HD 8 : 2016+ Can-Am Defender HD 8 DPS : 2016+ Can-Am Defender HD 8 XT : 2016+ Can-Am Defender HD 8 XT Cab : 2016+ Can-Am Defender HD 8 XTP : 2018+ Can-Am Defender HD 10 : 2016-2019 Can-Am Defender HD 10 DPS : 2016-2019 Can-Am Defender HD 10 XT : 2016-2019 Can-Am Defender HD 10 XT Cab : 2016-2019 Can-Am Defender HD 10 XTP : 2018-2019 Can-Am Defender HD 10 Mossy Oak : 2018+ Can-Am Defender HD 10 XMR : 2018+ Can-Am Defender Limited : 2020+ Can-Am Defender MAX HD 8 : 2017+ Can-Am Defender MAX HD 8 DPS : 2017+ Can-Am Defender MAX HD 8 XT : 2017+ Can-Am Defender MAX HD 8 XT Cab : 2017+ Can-Am Defender MAX HD 10 : 2017-2019 Can-Am Defender MAX HD 10 DPS : 2017-2019 Can-Am Defender MAX HD 10 XT : 2017+-2019/li> Can-Am Defender MAX HD 10 XT Cab : 2017+ Can-Am Defender MAX Lone Star Edition : 2018+ Can-Am Defender MAX XMR : 2019+ Can-Am Defender MAX Limited : 2020+ NOTE: Stock wheels on XMR models will require a 1" wheel spacer

-Works on most control cables with 4 mm to 8 mm OD housing

Threebond Low Strength Thread Locker 0.34 oz. #1342AT002- Motorex 14” wheels cannot exceed 4-1/2”ThreeBond's thread lockers inhibit the development of rust, leaks corrosion, and are not affected by oils, chemicals, salt water, various gases or organic solvents. Low strength: for frequent removal. High strength: for infrequent removal.